Preguntas de compradores

Question 1

How do I judge which oxygen chamber is suitable?

Accepted Answer

Start with single-use capacity, venue type, door width and height, room conditions and any exterior or interior customization needs, then use the shopping guide to narrow the range to 2-3 models.

Question 2

What entry size is recommended?

Accepted Answer

We recommend a door width of at least 860 mm and a door height of at least 2000 mm. Larger two-person or multi-person chambers also require elevator, turning, unloading route and floor load checks.

Question 3

Can nasal oxygen and BIBS mask oxygen be configured together?

Accepted Answer

Yes. Nasal oxygen and BIBS mask oxygen can coexist and switch. The final setup depends on capacity, venue and operation mode.

Question 4

What can be customized?

Accepted Answer

Color, exterior, interior color and material, flooring, logo, ambient lighting, star ceiling, red light, TV, seating and oxygen flow upgrades can be discussed by project.

Question 5

What pressure range do the hard-shell chambers support?

Accepted Answer

The product line can be configured up to 2.5 ATA depending on model and project requirements. Final pressure configuration should be confirmed before production.

Question 6

How should oxygen flow be selected?

Accepted Answer

Single-person chambers commonly use 10L and can upgrade to 20L. Two-person chambers commonly use 20L and can upgrade to 40L. Four-person chambers commonly use 40L and can upgrade to 80L.

Question 7

Which venues are suitable for hard-shell oxygen chambers?

Accepted Answer

Common venues include clinics, med-spas, recovery studios, oxygen experience centers, hotels, sports recovery spaces, senior living projects and distributor showrooms.

Question 8

What should be checked before installation?

Accepted Answer

Check door width and height, elevator size, turning space, unloading route, floor load, room ventilation, power supply and the final placement direction.

Question 9

What information is usually confirmed before delivery?

Accepted Answer

Confirm model, capacity, color, oxygen method, flow upgrade, interior finish, seating, logo, access route, packing details and site contact information.

Question 10

Can the seat be changed?

Accepted Answer

Yes. Massage chair or ordinary sofa seating can be selected according to model space, venue position and operating budget.

Question 11

Can the chamber be used for distributor showrooms?

Accepted Answer

Yes. Distributor showrooms often need strong exterior presence, visible interiors, lighting effects, sample configuration clarity and clear model comparison materials.

Question 12

What should buyers prepare for after-sales communication?

Accepted Answer

Keep model information, configuration record, installation photos, use environment, fault description and short videos when reporting an issue so the team can judge faster.

Question 13

What is the difference between a hard-shell chamber and a soft chamber?

Accepted Answer

Hard-shell chambers usually focus on a more stable cabin body, stronger commercial appearance, clearer door/window structure and higher project customization. Soft chambers are lighter and easier to move, but are usually positioned for different pressure and usage scenarios.

Question 14

What power and room conditions should be prepared?

Accepted Answer

Before production and delivery, confirm local voltage, socket type, room ventilation, drainage or humidity conditions if relevant, floor load, access route and final placement direction. Large projects should confirm these details before packing.

Question 15

Does the room need ventilation?

Accepted Answer

Yes. A clean, ventilated room helps heat, humidity and operating comfort. Commercial venues should also keep clear access around the chamber for maintenance and emergency operation.

Question 16

Can certificates and compliance documents be provided?

Accepted Answer

Certificate, test report, factory audit and export document display areas are prepared on the About page. The final document package should be confirmed according to destination country, buyer type and project requirements.

Question 17

What maintenance is usually needed?

Accepted Answer

Routine checks usually include door seal condition, pressure gauge, valves, oxygen connection, interior cleaning, control panel status and visible wear. Commercial operators should keep a simple inspection log.

Question 18

Can the logo and exterior be customized?

Accepted Answer

Yes. Logo effect preview, shell printing, embroidery, exterior color, interior color and material, flooring and seating can be aligned with the venue design before production.

Question 19

What affects production and delivery timing?

Accepted Answer

Timing depends on model, quantity, color, interior, logo work, oxygen flow configuration, testing, packaging method and shipping destination. Custom projects should reserve extra time for confirmation and inspection.

Question 20

Can the website describe disease-related medical effects?

Accepted Answer

No. Product pages should avoid replacing professional diagnosis or medical advice. Buyers should follow local regulations and qualified medical guidance for clinical claims.

Blog

Guías de compra, comparativas de productos y respuestas para proyectos

OxySail Oxygen Chamber Volume and Weight Guide: Model Dimensions, Packed Equipment and Shipping Notes

Matriz completa de modelos de cámaras de oxígeno rígidas OxySail

Guía de aplicación de cámaras de oxígeno para el mercado internacional

Guía de aplicación de cámaras de oxígeno para el mercado internacional

Catálogo de cámaras hiperbáricas rígidas: modelos y configuraciones

Atención al cliente

Atención al cliente